SKF S71919 ACB/HCP4A Angular contact ball bearings, super-precision

SKF S71919 ACB/HCP4A Angular contact ball bearings, super-precision
Angular contact ball bearings, super-precision

Tolerances: P4A, P4, PA9A, P2, Chamfer dimensionsRecommended shaft and housing fits: shafts, housingsValues for ISO tolerance classes: shafts, housingsSpeed dependent initial grease fill →Initial grease fillClamping and fitting forces: D design, E design, B design

Designation suffixes H, H1, L and L1identify variants for direct oil-air lubrication(→Variants).

d		95	mm
D		130	mm
B		18	mm
d1		107.94	mm
d2		106.36	mm
D2		120.7	mm
r1,2	min.	1.1	mm
r3,4	min.	0.6	mm
a		40.2	mm

Abutment dimensions

da	min.	101	mm
da	max.	107.2	mm
db	min.	101	mm
db	max.	105.7	mm
Da	max.	124	mm
Db	max.	126.8	mm
ra	max.	1	mm
rb	max.	0.6	mm

Calculation data

Basic dynamic load rating	C		22.9	kN
Basic static load rating	C0		28	kN
Fatigue load limit	Pu		0.71	kN
Attainable speed for grease lubrication			14000	r/min
Ball diameter	Dw		7.144	mm
Number of balls	z		38
Preload and stiffness (back-to-back, face-to-face)
Preload class A	GA		105	N
Static axial stiffness, preload class A			165	N/µm
Preload class B	GB		210	N
Static axial stiffness, preload class B			211	N/µm
Preload class C	GC		630	N
Static axial stiffness, preload class C			320	N/µm
Calculation factors
Calculation factor	f		1.13
Calculation factor	f1		0.99
Calculation factor	f2A		1
Calculation factor	f2B		1.02
Calculation factor	f2C		1.08
Calculation factor	fHC		1.01
Calculation factor	e		0.68
Calculation factor (single, tandem)	Y2		0.87
Calculation factor (single, tandem)	Y0		0.38
Calculation factor (single, tandem)	X2		0.41
Calculation factor (back-to-back, face-to-face)	Y1		0.92
Calculation factor (back-to-back, face-to-face)	Y2		1.41
Calculation factor (back-to-back, face-to-face)	Y0		0.76
Calculation factor (back-to-back, face-to-face)	X2		0.67

Mass

Mass bearing

0.61

kg

<input type="hidden" name="moreInfoUrl" value="">