SKF S7022 ACD/P4A Angular contact ball bearings, super-precision

SKF S7022 ACD/P4A Angular contact ball bearings, super-precision
Angular contact ball bearings, super-precision

Tolerances: P4A, P4, PA9A, P2, Chamfer dimensionsRecommended shaft and housing fits: shafts, housingsValues for ISO tolerance classes: shafts, housingsSpeed dependent initial grease fill →Initial grease fillClamping and fitting forces: D design, E design, B design

Designation suffixes H, H1, L and L1identify variants for direct oil-air lubrication(→Variants).

d		110	mm
D		170	mm
B		28	mm
d1		128.5	mm
d2		128.5	mm
D2		155.15	mm
r1,2	min.	2	mm
r3,4	min.	1	mm
a		46.8	mm

Abutment dimensions

da	min.	119	mm
da	max.	127.9	mm
db	min.	119	mm
db	max.	127.9	mm
Da	max.	161	mm
Db	max.	165	mm
ra	max.	2	mm
rb	max.	1	mm

Calculation data

Basic dynamic load rating	C		104	kN
Basic static load rating	C0		104	kN
Fatigue load limit	Pu		3.75	kN
Attainable speed for grease lubrication			7000	r/min
Ball diameter	Dw		19.05	mm
Number of balls	z		20
Preload and stiffness (back-to-back, face-to-face)
Preload class A	GA		650	N
Static axial stiffness, preload class A			290	N/µm
Preload class B	GB		1300	N
Static axial stiffness, preload class B			379	N/µm
Preload class C	GC		2600	N
Static axial stiffness, preload class C			503	N/µm
Preload class D	GD		5200	N
Static axial stiffness, preload class D			681	N/µm
Calculation factors
Calculation factor	f		1.14
Calculation factor	f1		0.99
Calculation factor	f2A		1
Calculation factor	f2B		1.02
Calculation factor	f2C		1.05
Calculation factor	f2D		1.08
Calculation factor	fHC		1
Calculation factor	e		0.68
Calculation factor (single, tandem)	Y2		0.87
Calculation factor (single, tandem)	Y0		0.38
Calculation factor (single, tandem)	X2		0.41
Calculation factor (back-to-back, face-to-face)	Y1		0.92
Calculation factor (back-to-back, face-to-face)	Y2		1.41
Calculation factor (back-to-back, face-to-face)	Y0		0.76
Calculation factor (back-to-back, face-to-face)	X2		0.67

Mass

Mass bearing

2

kg

<input type="hidden" name="moreInfoUrl" value="">