SKF SE 511-609 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals

SKF SE 511-609 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals
Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals

Bearing (basic designation)			C 2211 K
Adapter sleeve			H 311 E
Locating ring			2 x FRB 9.5/100

Dimensions

da		50	mm
Ca		44	mm
Da		100	mm
Db		67	mm
A		95	mm
A1		70	mm
H		129	mm
H1		70	mm
H2		28	mm
J		210	mm
L		255	mm
N		24	mm
N1		18	mm
Dowel pins
J6		234	mm
J7		24.5	mm
N4	max.	8	mm
Seal dimensions
A2L		107	mm
A2T		165	mm
d2		123	mm

Appropriate seals and end cover

TSN 511 C

TSN 511 L

TSN 511 A

2 x TSN 511 S

2 x TK 511

ASNH 511-609

Breaking loads, housing

P0°		190	kN
P55°		275	kN
P90°		170	kN
P120°		125	kN
P150°		115	kN
P180°		140	kN
Pa		90	kN

Yield point, cap bolts

Q120°		220	kN
Q150°		125	kN
Q180°		110	kN

Mass

Mass housing

5.46

kg

Mounting information

Cap bolt, size			M 12x60
Cap bolt, rec. tightening torque			80	N·m
Appropriate attachment bolt, size	G		16	mm
Appropriate attachment bolt, rec. tightening torque			200	N·m
Initial grease fill, 20%			55	g
Initial grease fill, 40%			90	g

<input type="hidden" name="moreInfoUrl" value="">