SKF SE 511-609 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals

SKF SE 511-609 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals
Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals

Bearing (basic designation)			1309
Lock nut			KM 9
Lock washer			MB 9
Locating ring			2 x FRB 9.5/100

Dimensions

da		45	mm
db		55	mm
Ca		44	mm
Da		100	mm
Db		67	mm
A		95	mm
A1		70	mm
H		129	mm
H1		70	mm
H2		28	mm
J		210	mm
L		255	mm
N		24	mm
N1		18	mm
Dowel pins
J6		234	mm
J7		24.5	mm
N4	max.	8	mm
Seal dimensions
A2L		107	mm

Appropriate seals and end cover

TSN 309 A

2 x TSN 309 S

ASNH 511-609

Breaking loads, housing

P0°		190	kN
P55°		275	kN
P90°		170	kN
P120°		125	kN
P150°		115	kN
P180°		140	kN
Pa		90	kN

Yield point, cap bolts

Q120°		220	kN
Q150°		125	kN
Q180°		110	kN

Mass

Mass housing

5.46

kg

Mounting information

Cap bolt, size			M 12x60
Cap bolt, rec. tightening torque			80	N·m
Appropriate attachment bolt, size	G		16	mm
Appropriate attachment bolt, rec. tightening torque			200	N·m
Initial grease fill, 20%			55	g
Initial grease fill, 40%			90	g

<input type="hidden" name="moreInfoUrl" value="">