SKF SE 208-307 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals

SKF SE 208-307 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals
Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals

Bearing (basic designation)			21307
Lock nut			KM 7
Lock washer			MB 7
Locating ring			2 x FRB 9/80

Dimensions

da		35	mm
db		45	mm
Ca		39	mm
Da		80	mm
Db		62	mm
A		85	mm
A1		60	mm
H		108	mm
H1		60	mm
H2		25	mm
J		170	mm
L		205	mm
N		20	mm
N1		15	mm
Dowel pins
J6		188	mm
J7		22	mm
N4	max.	6	mm
Seal dimensions
A2L		99	mm

Appropriate seals and end cover

TSN 307 A

2 x TSN 307 S

ASNH 510-608

Breaking loads, housing

P0°		150	kN
P55°		215	kN
P90°		130	kN
P120°		95	kN
P150°		85	kN
P180°		110	kN
Pa		70	kN

Yield point, cap bolts

Q120°		150	kN
Q150°		85	kN
Q180°		75	kN

Mass

Mass housing

3.28

kg

Mounting information

Cap bolt, size			M 10x55
Cap bolt, rec. tightening torque			50	N·m
Appropriate attachment bolt, size	G		12	mm
Appropriate attachment bolt, rec. tightening torque			80	N·m
Initial grease fill, 20%			35	g
Initial grease fill, 40%			55	g

<input type="hidden" name="moreInfoUrl" value="">