SKF FSE 512-610 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals

SKF FSE 512-610 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals
Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals

Bearing (basic designation)			22310
Lock nut			KM 10
Lock washer			MB 10
Locating ring			2 x FRB 4/110

Dimensions

da		50	mm
db		60	mm
Ca		48	mm
Da		110	mm
Db		72	mm
A		105	mm
A1		70	mm
H		134	mm
H1		70	mm
H2		30	mm
J		210	mm
J1		35	mm
L		255	mm
N		20	mm
N1		15	mm
Dowel pins
J6		234	mm
N4	max.	8	mm
Seal dimensions
A2L		117	mm

Appropriate seals and end cover

TSN 310 A

2 x TSN 310 S

ASNH 512-610

Breaking loads, housing

P0°		210	kN
P55°		300	kN
P90°		180	kN
P120°		130	kN
P150°		120	kN
P180°		150	kN
Pa		100	kN

Yield point, cap bolts

Q120°		220	kN
Q150°		125	kN
Q180°		110	kN

Mass

Mass housing

6.15

kg

Mounting information

Cap bolt, size			M 12x65
Cap bolt, rec. tightening torque			80	N·m
Appropriate attachment bolt, size	G		12	mm
Appropriate attachment bolt, rec. tightening torque			80	N·m
Initial grease fill, 20%			80	g
Initial grease fill, 40%			135	g

<input type="hidden" name="moreInfoUrl" value="">