SKF 7018 CE/P4A Angular contact ball bearings, super-precision

SKF 7018 CE/P4A Angular contact ball bearings, super-precision
Angular contact ball bearings, super-precision

Tolerances: P4A, P4, PA9A, P2, Chamfer dimensionsRecommended shaft and housing fits: shafts, housingsValues for ISO tolerance classes: shafts, housingsSpeed dependent initial grease fill →Initial grease fillClamping and fitting forces: D design, E design, B design

Designation suffixes H, H1, L and L1identify variants for direct oil-air lubrication(→Variants).

d		90	mm
D		140	mm
B		24	mm
d1		108.33	mm
d2		105.5	mm
D1		121.66	mm
r1,2	min.	1.5	mm
r3,4	min.	1	mm
a		27.5	mm

Abutment dimensions

da	min.	97	mm
db	min.	97	mm
Da	max.	133	mm
Db	max.	134.4	mm
ra	max.	1.5	mm
rb	max.	1	mm
dn		111	mm

Calculation data

Basic dynamic load rating	C		35.8	kN
Basic static load rating	C0		32	kN
Fatigue load limit	Pu		1.27	kN
Attainable speed for grease lubrication			13300	r/min
Attainable speed for oil-air lubrication			21000	r/min
Ball diameter	Dw		11.112	mm
Number of balls	z		28
Reference grease quantity	Gref		14	cm³
Preload and stiffness (back-to-back, face-to-face)
Preload class A	GA		190	N
Static axial stiffness, preload class A			79	N/µm
Preload class B	GB		580	N
Static axial stiffness, preload class B			125	N/µm
Preload class C	GC		1150	N
Static axial stiffness, preload class C			171	N/µm
Calculation factors
Calculation factor	f		1.1
Calculation factor	f1		1
Calculation factor	f2A		1
Calculation factor	f2B		1.03
Calculation factor	f2C		1.05
Calculation factor	fHC		1
Calculation factor	f0		9.6

Mass

Mass bearing

1.2

kg

<input type="hidden" name="moreInfoUrl" value="">