SKF 7016 CE/P4AH1 Angular contact ball bearings, super-precision

SKF 7016 CE/P4AH1 Angular contact ball bearings, super-precision
Angular contact ball bearings, super-precision

Tolerances: P4A, P4, PA9A, P2, Chamfer dimensionsRecommended shaft and housing fits: shafts, housingsValues for ISO tolerance classes: shafts, housingsSpeed dependent initial grease fill →Initial grease fillClamping and fitting forces: D design, E design, B design

Designation suffixes H, H1, L and L1identify variants for direct oil-air lubrication(→Variants).

d		80	mm
D		125	mm
B		22	mm
d1		95.83	mm
d2		93	mm
D1		109.17	mm
K		0.5	mm
C1		7.27	mm
r1,2	min.	1.1	mm
r3,4	min.	0.6	mm
a		24.9	mm

Abutment dimensions

da	min.	86	mm
db	min.	86	mm
Da	max.	119	mm
Db	max.	120.8	mm
ra	max.	1	mm
rb	max.	0.6	mm
dn		98.5	mm

Calculation data

Basic dynamic load rating	C		33.8	kN
Basic static load rating	C0		28	kN
Fatigue load limit	Pu		1.18	kN
Attainable speed for grease lubrication			15000	r/min
Attainable speed for oil-air lubrication			24000	r/min
Ball diameter	Dw		11.112	mm
Number of balls	z		25
Reference grease quantity	Gref		12	cm³
Preload and stiffness (back-to-back, face-to-face)
Preload class A	GA		180	N
Static axial stiffness, preload class A			72	N/µm
Preload class B	GB		550	N
Static axial stiffness, preload class B			114	N/µm
Preload class C	GC		1090	N
Static axial stiffness, preload class C			157	N/µm
Calculation factors
Calculation factor	f		1.1
Calculation factor	f1		1
Calculation factor	f2A		1
Calculation factor	f2B		1.03
Calculation factor	f2C		1.05
Calculation factor	fHC		1
Calculation factor	f0		9.4

Mass

Mass bearing

0.86

kg

<input type="hidden" name="moreInfoUrl" value="">