SKF SSAFS 22216 T SAF and SAW pillow blocks with bearings with a cylindrical bore

SKF SSAFS 22216 T SAF and SAW pillow blocks with bearings with a cylindrical bore
SAF and SAW pillow blocks with bearings with a cylindrical bore

da		80	mm
db		92.075	mm
dc		76.2	mm
Da		140	mm
Ca		42.799	mm
A1		88.9	mm
A2		208.756	mm
S		4.763	mm
ba		34.131	mm
H		174.625	mm
H1		88.9	mm
H2		31.75	mm
L		330.2	mm
Threaded holes
R1		53.181	mm
R2		21.431	mm
RG		3/8 NPT
PG		1/8 NPT
Oil level
h		31.75	mm

Appertaining products

Housing			SAFS 216
Bearing			22216 E
Check availability of other clearance classes (e.g. C3)
Lock nut			AN 16
Lock washer			W 16
Stabilizing ring			SR-16-13
Taconite seal (db shaft position)			TER 82
Taconite seal (dc shaft position)			TER 54

Appropriate products

End plug (suffix Y)

EPR 9

Speed ratings

Max. speed for Taconite seal

850

r/min

Recommended safe loads

P60°		83.2	kN
P90°		49.8	kN
P120°		30.2	kN
P150°		26.7	kN
P180°		31.6	kN
Pa		20.5	kN

Mass

Mass pillow block

20.4

kg

Mounting information

Cap bolt			2 x 5/8-11 UNC
Cap bolt recommended tightening torque			203.4	N·m
Cap bolt, SAE grade			5
Initial grease fill			175.77	g

<input type="hidden" name="moreInfoUrl" value="">