SKF SNL 518-615 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals

SKF SNL 518-615 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals
Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals

Bearing (basic designation)			2218
Lock nut			KM 18
Lock washer			MB 18
Locating ring			2 x FRB 12.5/160

Dimensions

da		90	mm
db		100	mm
Ca		65	mm
Da		160	mm
Db		102.5	mm
A		140	mm
A1		100	mm
H		194	mm
H1		100	mm
H2		35	mm
J		290	mm
L		345	mm
N		28	mm
N1		22	mm
Dowel pins
J6		317	mm
J7		35	mm
N4	max.	8	mm

Appropriate seals and end cover

4 x FS 170

ASNH 518-615

Breaking loads, housing

P0°		430	kN
P55°		550	kN
P90°		340	kN
P120°		250	kN
P150°		215	kN
P180°		275	kN
Pa		180	kN

Yield point, cap bolts

Q120°		400	kN
Q150°		230	kN
Q180°		200	kN

Mass

Mass housing

12.5

kg

Mounting information

Cap bolt, size			M 16x90
Cap bolt, rec. tightening torque			150	N·m
Appropriate attachment bolt, size	G		20	mm
Appropriate attachment bolt, rec. tightening torque			385	N·m
Initial grease fill, 20%			260	g
Initial grease fill, 40%			430	g

<input type="hidden" name="moreInfoUrl" value="">