SKF SAF 1318 TLC SAF and SAW pillow blocks with bearings with a cylindrical bore

SKF SAF 1318 TLC SAF and SAW pillow blocks with bearings with a cylindrical bore
SAF and SAW pillow blocks with bearings with a cylindrical bore

da		90	mm
db		104.775	mm
dc		85.725	mm
Da		190	mm
Ca		73.787	mm
A1		111.125	mm
A2		174.625	mm
ba		42.069	mm
H		230.981	mm
H1		120.65	mm
H2		50.8	mm
J	min.	304.8	mm
J	max.	342.9	mm
J1		57.15	mm
L		393.7	mm
N1		22.225	mm
Threaded holes
R1		73.025	mm
R2		28.575	mm
RG		3/8 NPT
PG		1/4 NPT
Oil level
h		50.8	mm

Appertaining products

Housing			SAF 318
Bearing			1318
Check availability of other clearance classes (e.g. C3)
Lock nut			AN 18
Lock washer			W 18
Stabilizing ring			2 x SR-1618
Labyrinth ring (db shaft position)			LOR 112
PosiTrac Plus contact element (db shaft position)			B10724-113
Labyrinth ring (dc shaft position)			LOR 191
PosiTrac Plus contact element (dc shaft position)			B10724-188

Appropriate products

End plug (suffix Y)

EPR 11

Speed ratings

Max. speed for PosiTrac Plus seal

1350

r/min

Recommended safe loads

P60°		128	kN
P90°		77	kN
P120°		48.9	kN
P150°		44.5	kN
P180°		54.3	kN
Pa		35.1	kN

Mass

Mass pillow block

39.2

kg

Mounting information

Cap bolt			2 x 3/4-10 UNC
Cap bolt recommended tightening torque			515.2	N·m
Cap bolt, SAE grade			8
Appropriate attachment bolt size	G		0.75	in
Initial grease fill			481.95	g

<input type="hidden" name="moreInfoUrl" value="">