SKF FSNL 530 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals

SKF FSNL 530 Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals
Split plummer block housings, SNL and SE series for bearings on a cylindrical seat, with standard seals

Bearing (basic designation)			23230
Lock nut			KM 30
Lock washer			MB 30
Locating ring			2 x FRB 5/270

Dimensions

da		150	mm
db		165	mm
Ca		106	mm
Da		270	mm
Db		192.5	mm
A		220	mm
A1		160	mm
H		323	mm
H1		160	mm
H2		60	mm
J		450	mm
J1		90	mm
L		530	mm
N		32	mm
N1		26	mm
Dowel pins
J6		486	mm
N4	max.	12	mm
Seal dimensions
A2L		241	mm

Appropriate seals and end cover

TSN 230 L

TSN 230 A

2 x TSN 230 S

ASNH 530

Breaking loads, housing

P0°		1100	kN
P55°		1200	kN
P90°		730	kN
P120°		540	kN
P150°		480	kN
P180°		600	kN
Pa		390	kN

Yield point, cap bolts

Q120°		900	kN
Q150°		520	kN
Q180°		450	kN

Mass

Mass housing

49

kg

Mounting information

Cap bolt, size			M 24x130
Cap bolt, rec. tightening torque			350	N·m
Appropriate attachment bolt, size	G		24	mm
Appropriate attachment bolt, rec. tightening torque			665	N·m
Initial grease fill, 20%			1100	g
Initial grease fill, 40%			1700	g

<input type="hidden" name="moreInfoUrl" value="">