SKF FSNL 519-616 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals

SKF FSNL 519-616 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals
Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals

Bearing (basic designation)			22316 K
Adapter sleeve			HE 2316
Locating ring			2 x FRB 5/170

Dimensions

da		69.85	mm
Ca		68	mm
Da		170	mm
Db		131	mm
A		145	mm
A1		100	mm
H		212	mm
H1		112	mm
H2		35	mm
J		290	mm
J1		50	mm
L		345	mm
N		24	mm
N1		18	mm
Dowel pins
J6		317	mm
N4	max.	8	mm
Seal dimensions
A2L		163	mm

Appropriate seals and end cover

TSN 616 C

TSN 616 L

TSN 616 A

2 x TSN 616 SE

ASNH 519-616

Breaking loads, housing

P0°		450	kN
P55°		580	kN
P90°		350	kN
P120°		260	kN
P150°		230	kN
P180°		290	kN
Pa		190	kN

Yield point, cap bolts

Q120°		400	kN
Q150°		230	kN
Q180°		200	kN

Mass

Mass housing

13.7

kg

Mounting information

Cap bolt, size			M 16x90
Cap bolt, rec. tightening torque			150	N·m
Appropriate attachment bolt, size	G		16	mm
Appropriate attachment bolt, rec. tightening torque			200	N·m
Initial grease fill, 20%			300	g
Initial grease fill, 40%			480	g

<input type="hidden" name="moreInfoUrl" value="">