SKF FSE 515-612 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals

SKF FSE 515-612 Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals
Split plummer block housings, SNL and SE series for bearings on an adapter sleeve, with standard seals

Bearing (basic designation)			21312 K
Adapter sleeve			H 312
Locating ring			2 x FRB 12.5/130

Dimensions

da		55	mm
Ca		56	mm
Da		130	mm
Db		87	mm
A		115	mm
A1		80	mm
H		156	mm
H1		80	mm
H2		30	mm
J		230	mm
J1		40	mm
L		280	mm
N		20	mm
N1		15	mm
Dowel pins
J6		257	mm
N4	max.	8	mm
Seal dimensions
A2L		127	mm

Appropriate seals and end cover

TSN 612 C

TSN 612 L

TSN 612 A

2 x TSN 612 S

ASNH 515-612

Breaking loads, housing

P0°		290	kN
P55°		410	kN
P90°		250	kN
P120°		185	kN
P150°		160	kN
P180°		205	kN
Pa		135	kN

Yield point, cap bolts

Q120°		220	kN
Q150°		125	kN
Q180°		110	kN

Mass

Mass housing

8.57

kg

Mounting information

Cap bolt, size			M 12x70
Cap bolt, rec. tightening torque			80	N·m
Appropriate attachment bolt, size	G		12	mm
Appropriate attachment bolt, rec. tightening torque			80	N·m
Initial grease fill, 20%			125	g
Initial grease fill, 40%			210	g

<input type="hidden" name="moreInfoUrl" value="">