SKF FSAF 22312 TLC SAF and SAW pillow blocks with bearings with a cylindrical bore

SKF FSAF 22312 TLC SAF and SAW pillow blocks with bearings with a cylindrical bore
SAF and SAW pillow blocks with bearings with a cylindrical bore

da		60	mm
db		73.025	mm
dc		57.15	mm
Da		130	mm
Ca		55.804	mm
A1		79.375	mm
A2		130.175	mm
S		4.763	mm
ba		38.1	mm
H		161.925	mm
H1		82.55	mm
H2		30.163	mm
J	min.	219.075	mm
J	max.	244.475	mm
J1		47.625	mm
L		285.75	mm
N1		15.875	mm
Threaded holes
R1		49.213	mm
R2		19.05	mm
RG		1/8 NPT
PG		1/8 NPT
Oil level
h		33.338	mm

Appertaining products

Housing			FSAF 312
Bearing			22312 E
Check availability of other clearance classes (e.g. C3)
Lock nut			N 12
Lock washer			W 12
Stabilizing ring			SR-15-12
Labyrinth ring (db shaft position)			LOR 47
PosiTrac Plus contact element (db shaft position)			B10724-44
Labyrinth ring (dc shaft position)			LOR 33
PosiTrac Plus contact element (dc shaft position)			B10724-32

Appropriate products

End plug (suffix Y)

EPR 7

Speed ratings

Max. speed for PosiTrac Plus seal

2150

r/min

Recommended safe loads

P60°		42.3	kN
P90°		25.4	kN
P120°		15.6	kN
P150°		13.8	kN
P180°		16.9	kN
Pa		10.7	kN

Mass

Mass pillow block

14.1

kg

Mounting information

Cap bolt			2 x 1/2-13 UNC
Cap bolt recommended tightening torque			149.1	N·m
Cap bolt, SAE grade			8
Appropriate attachment bolt size	G		0.5	in
Initial grease fill			87.885	g

<input type="hidden" name="moreInfoUrl" value="">